Read also: How can you secure home Wi-Fi without overcomplicating the settings? ↗
Read also: How do I find my IP address on a phone or computer? ↗
A speed test measures one connection at one moment
To measure internet speed, use a recognised tool, reduce traffic from other devices and, where possible, start with a computer connected directly to the router by Ethernet. Compare that result with Wi-Fi and repeat at different times. One number describes particular conditions; it cannot identify the source of every connection problem by itself.
The result reflects the device, local connection, provider access and route to the test server. Measuring on a phone in a distant room answers a different question from measuring on a wired computer. The first helps describe the experience in that location; the second can reduce the influence of Wi-Fi when assessing the underlying service.
Check your contract and the equipment specifications
Confirm the download and upload speeds in your contract and whether the service is fixed or mobile. Do not assume that the two rates are equal. Read the performance references and conditions that apply to your service rather than comparing every result solely with the largest number in an advertisement or a neighbour’s experience.
Identify the router model, the computer’s network port and any adapter in use. A connection containing a component limited to 100 Mbps cannot demonstrate the full potential of a faster service. An older or overloaded device may also affect the measurement. Checking these details can prevent paying for a larger package when the practical limitation is already inside the home.
Choose a tool and consider data use and privacy
Portugal’s ANACOM provides NET.mede. Cloudflare Speed Test and Ookla’s Speedtest are other recognised tools. Visit the official pages directly and check what each test measures. A website-loading performance test is not necessarily measuring the capacity of your own internet connection, even when both results are described using the word speed.
Speed tests transfer data and can consume a significant part of a mobile allowance. Cloudflare warns that its test can use up to 200 MB. Read the privacy information and avoid granting precise location access unless it serves your purpose. Do not publicly share screenshots containing your IP address, location, network name or account identifiers without checking what they reveal.
Prepare a wired measurement with little competing traffic
Connect a computer to the router using Ethernet ports and a cable suitable for the rate you want to check. For services above 100 Mbps, confirm that the relevant equipment supports at least gigabit connections where required. A USB adapter or older network port can constrain the result even when the cable looks undamaged and all connection lights are on.
Pause downloads, cloud backups, streaming and updates around the home without interrupting essential services. Close applications consuming network capacity. If a VPN can be disconnected safely and with permission, measure without it to assess the base connection more directly. On work equipment, follow organisational rules rather than disabling required protections to produce a higher result.
Compare Wi-Fi in controlled conditions
After establishing a wired reference, measure Wi-Fi close to the router and then where you normally use the internet. Keep the same device, tool and usage conditions where possible. Record the room and approximate distance. Changing several things together makes it difficult to establish which difference actually influenced the result, even if the second number happens to look better.
Walls, interference, device capabilities and the wireless band can all affect performance. A 5 GHz Wi-Fi network is not the same thing as a 5G mobile network. Nor is it correct to assume that a higher frequency always performs better in every room. Compare the experience in the intended location rather than choosing only by the network name.
Run the test and record more than the highest number
Follow the tool’s instructions and allow its download and upload stages to finish. Note the date, time, device, connection type, tool and results. Keep the server reference too if the page identifies it. Do not start another transfer during the measurement simply to see whether the figure changes; that creates a different set of conditions.
Repeat at different times while keeping conditions comparable, and retain the whole set of results. Do not select only the best or worst as though it described every day. If you change tool or server for comparison, record the change. A small table of organised measurements can reveal a pattern more effectively than many screenshots with no explanation of how they were obtained.
Download, upload and the difference between Mbps and MB/s
Download describes receiving data, such as saving a file from the internet; upload describes sending it, such as putting a video in cloud storage. Tests commonly report Mbps, or megabits per second. A transfer application may instead display MB/s, megabytes per second. The capital letter matters because one byte contains eight bits.
Using decimal units, 80 Mbps is theoretically equivalent to 10 MB/s. A 250 MB file would take an ideal 25 seconds at that constant rate. This calculation explains units rather than promising a download time: protocols, the server, connection variation and other limits increase actual transfer time. MB and MiB also use different conventions, so check the units before comparing file sizes.
Latency, jitter and packet loss explain another part of performance
Latency expresses response time, commonly in milliseconds. Jitter describes variation in those timings; packet loss concerns sent data that does not arrive as expected. Calls and games can suffer from irregular responses even when the download figure looks high. Increasing only the advertised download rate therefore does not automatically resolve every delay or interruption.
Read the tool’s definition because calculation methods can differ. Where measurements show latency with and without heavy traffic, compare them: a connection can respond differently during a transfer. Avoid applying one universal threshold to every activity. Distance to the server, the service being used and conditions along the route also influence the experience, rather than everything being determined by the router.
Use comparisons to investigate without jumping to conclusions
If wired results are consistent while Wi-Fi deteriorates in one room, that suggests a local coverage or interference limitation. If both are poor under controlled conditions, investigate equipment and the access service with your provider. These comparisons help direct troubleshooting, but they do not replace technical analysis or prove one particular fault on their own.
A second device can help distinguish an issue confined to one computer from a problem shared across the home. Change one thing at a time and record its effect. Avoid buying repeaters, mesh equipment or another router before understanding the pattern. Additional equipment placed poorly may fail to solve the cause that the measurements are actually revealing.
A good test does not guarantee that every website is fast
A test server is not the server used by every application. A video platform, shop or work transfer may have its own limits or use a different internet route. Processing time on the device and website also matters. One slow page therefore does not automatically establish that your access package is delivering too few Mbps.
Similarly, a VPN, a remote corporate connection or a distant server can change the experience. If tests look good but one application fails, record the service, time and kind of error involved. Check that service’s official notices and compare other activities. Do not provide passwords or install unfamiliar programmes promising to unlock speed as part of an improvised attempt to improve the number.
Know when to contact the provider and what to bring
If performance repeatedly falls below expectations under suitable conditions, contact your provider with the measurements, equipment details and a description of the problem. Ask for a case reference and keep replies. In Portugal, consult ANACOM’s guidance and the electronic complaints book; in Brazil, Anatel advises starting with the provider and its customer-service channels. Elsewhere, consult the relevant local regulator.
One speed test does not automatically establish entitlement to compensation or cancellation without charges. Contract terms, persistent performance and applicable rules require assessment. Describe observable facts: no connection, low wired speeds at several times, or failures confined to one room. A precise description helps support a response suited to the problem rather than a generic discussion about internet quality.
Keep a record so you do not start again from nothing
Create a simple record covering the contract, device, connection, location, date, tool, download, upload and latency. Add notes about other network use and changes made. You do not need to turn the home into a laboratory. The purpose is to compare results answering the same question and to distinguish access capacity from the experience delivered through Wi-Fi.
When the internet feels slow, start with controlled measurements before upgrading a package or replacing equipment. Compare Ethernet, Wi-Fi close to the router and the normal usage location, respecting each tool’s instructions and limitations. These results cannot predict every service, but they provide a much stronger basis for deciding the next step and explaining the issue to someone able to investigate it.
Frequently asked questions
What is the most reliable way to test home internet?
Use a recognised tool on a computer connected to the router by Ethernet, with suitable equipment and little competing traffic. Repeat at different times.
Does a Wi-Fi test measure only the provider’s speed?
No. Wireless conditions, location and the device also influence it. Compare a wired measurement to reduce some of those variables.
What is the difference between download and upload?
Download receives data; upload sends it. Contracted rates may differ and affect different activities.
Is 80 Mbps the same as 80 MB/s?
No. A byte contains eight bits. With decimal units, 80 Mbps is theoretically 10 MB/s before other transfer limitations.
What is ping and why does it matter?
It indicates the response time measured by the tool. Delay and variation can affect calls and games even with high download speed.
Does a speed test use mobile data?
Yes. It transfers data and can use a meaningful part of an allowance. Check the tool’s information before running many tests.
Does one low result automatically let me cancel my contract?
Not by itself. Keep controlled measurements and contact your provider; the contract, persistence and applicable rules require assessment.
Should I buy a repeater if my internet is slow?
First compare wired access and Wi-Fi in different locations. A repeater may not resolve an access, device or application-specific issue.



